Aspire Platinum Kit with Atlantis Tank and Subohm Battery
Aspire Platinum Kit with Atlantis Tank and Subohm Battery, the best combination of atomizer and battery. New generation tank brings improved adjustable airflow and Sub Ohm coils that provides performance similar to even the best rebuildable atomizer.
Size: 22mm * 70.3mm
Tank: Pyres Glass
Base hardware: stainless steel
Available resistance: 0.5ohm (20-30W)
Aire hole size: 2mm, 2.8mm, ellipse 6*2.6mm, ellipse 9*2.6mm
Length x Diameter: 114.5 X 22mm
Suitable voltage: 3.0V~4.2V
Output Voltage: 4.2V full power output
Compatible with 0.3-1.0 Ω atomizer
Maximum current: 40A
Aspire Platinum Kit comes with
- 1 x Aspire CF SUBΩ 2000mah
- 1 x Atlantis 2ml
- 1 x 5pcs 0.5ohm atomizer coil
- 1 x USB charger
- 1 x Atlantis replacement tank with hollowed-out sleeve
- 1 x Real leather scabbard
- 1 x Start guide
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
1. Sub ohm 0.5Ω coil
2. Patented Aspire BVC technology
3. Battery with spring connector
4. Carbon fiber coated tube
5. Stainless steel metal button
6. Safety holes
7. Low battery indication
8. Full battery protection function
9. High Quality Cell and Control Circuit
10.Perfect inner structure design
How to fill atomizer
1. Turn upside down the cartomizer, and then screw off the bottom hardware.
2. Use the syringer or dropper to fill less than 2ml e-liquid into the space between the glass tank and the center metal tube. Do not overfill it.
3. Carefully screw on the bottom hardware, connect it with the battery and enjoy it.
How to control the Airflow
4 different airflow hole sizes: 2mm, 2.8mm, ellipse 6*2.6mm, ellipse 9*2.6mm . You can rotate the airflow control valve to choose the most comfortable one.
Turn ON/OFF: Press button 5 times in succession in 2 seconds. The LED will blink 3 times (both blue and orange lights) and the button will illuminate Blue when active and ON. Repeat this procedure to turn battery OFF.
Usage: Press the LED button and inhale at the same time.
LED Light Indicator: Blue LED light will display for battery cell voltage of 3.5-4.2V. The Orange LED indicates a voltage less than 3.5V.
-Unscrew the battery from the vaping components.
-Gently screw battery into the USB charger.
-Plug the USB into the supplied wall charger or computer.
-The battery will flash 3 times and then turn solid in color (Orange light in 3.2-3.5V, Blue light in 3.5-4.15V).
-The light on the USB charger will be red when charging.
-Once fully charged, the USB charger will display a green light, and the LED light on battery will turn off.
Battery Protection Function
-Overcharge Protection: When battery is overcharged (voltage beyond 4.25V), the built-in microchip will automatically stop battery charging.
-Overdischarge Protection: When battery cell voltage is less than 3.2V (low battery), the atomizer will remain OFF, and the Orange LED light will blink 15 times.
-Atomizer Short Circuit Protection: If heating coils are short-circuited while vaping, the LED lights (both colors) blink 3 times, and the battery will default to “sleep mode.”
-Charging Short Circuit Protection: If the charger is short-circuited while charging, the battery will default to OFF position, stop charging, and the LED lights (both colors) will flash 6 times.
-Lock and Unlock Function: To lock the battery, press the button 5 times in succession in 2 seconds. The LED lights (both colors) will flash 3 times. Repeat this procedure or recharge to unlock.
- It comes with 510/eGo thread.
- There is CE mark on the battery.
- You shall buy e-juice separately.