Lithicore Edge 4-Bay Charger - By Lithicore
The Lithicore EDGE 4 is a high end, four-slot smart charger designed to meet all battery charging demands. This appealing, safe and easy to operate smart charger is capable of automatically switching between 2A and 1A current options.
The EDGE 4s’ intuitive display makes the charging status easy to understand and its removable AC power supply adapter with added safety features makes this charger safe and convenient to operate. The EDGE 4 focuses on safe charging, easy operating and is designed with multiple safety features like reverse polarity protection, short circuit protection, over charge protection, high temperature protection and low voltage recovery. Its design makes this charger capable of simultaneously charging 4 cylindrical lithium ion batteries with different lengths and different capacities and can be used for electronic cigarette batteries, flashlight batteries, power tool batteries and many other products.
Charges at 2.0A while 1 or 2 batteries are inserted and automatically switches to 1.0A when 3 or 4 batteries are inserted. The two current charging modes applies for various lengths and capacities of cylindrical lithium ion batteries.
2.0A mode: While charging 1 or 2 of any cylindrical lithium ion battery listed below:
1.0A mode: While charging 3 or 4 of any cylindrical lithium ion battery listed below:
Input and Output
Input: AC 100-240V 50/60Hz
Output: 4.2V/2A*1/2A*2 4.2V/1A*3/1A*4
- 2.0A constant current charging: When one or two batteries are placed in any slots the charging current is 2A.
- 1.0A constant current charging: When three or four batteries are placed in the slots the charging current is automatically set to 1A.
- Cut-off voltage for charging: 4.20 ± 0.05V
- Cut-off current for constant voltage charging: <200mA
- Input standby current: <40m A/100V-230V AC 50HZ/60HZ
- Activation current (voltage <2.0V): 100mA-200mA
- The quiescent current: within 100uA
0V activation function: Insert the low-voltage battery (battery voltage ≤ 2.8V) within 5 minutes of the charger in standby mode, the charger will automatically recover the battery. Recovery time may vary depending on the discharge time and discharge level. Once the battery has recovered, the charging process will proceed normally.
Overcharge protection: If the batteries are fully charged and the charger is still connected to a power source, the charger will automatically stop charging.
Reverse polarity protection: While the charger is in standby mode, neither the positive nor negative poles can cause a short circuit to the slots or cause cross circuiting. If the batteries are placed in the slots in reverse, it will not cause damage to the batteries or charger.
LED display function: Each slot will display the charging status of the battery.
Description of the LED indication function:
The LED indications are:
- Each slot displays 5 lights
- Light will flash while charging
- Light will stay on when battery is fully charged
- All 5 lights will flash when charging is abnormal
When the EDGE 4 charger is connected to a power source, the system will begin self-detection and all of the LED indicators will light up. The charger will automatically enter standby mode after 1.5 seconds.